Helicopter will be delivered out of Bell facility in Piney Flats, TN with fresh 12 month inspection at no cost to purchaser. One 429 pilot transition course, 1 year of CAMP maintenance tracking, ground handling wheels, DMITS box, engine red gear, and blade tie-downs included with sale. No known damage history. Component Status Report available upon request.
Original flight/maintenance logbooks covering flight time up until 123.8 airframe hours missing and not located (partial copies are available, details upon request).
Pratt & Whitney PW207D1, serial numbers BL0281 & BL0284. 576/576 cycles since new.
Single or Dual Pilot IFR, with 3rd Cockpit Display Unit & 2nd Compass
Dual AFCS (3-axis)
Garmin GNS-530 GPS/Nav/Comm
HTAWS option enabled on GNS-530 (IGW)
Garmin GNS-430 GPS/Nav/Comm
PS Engineering PMA7000H Audio Panel
Garmin GTX-330 Transponder
Primus 660 Weather Radar w/new style radome
Avidyne TAS605 Traffic Advisory System
Radar Altimeter (Req. for Cat A & IGW)
King KR-87 ADF
Artex C406-1HM ELT
Air Comm Dual FWD Evap Air Conditioning
Inlet Barrier Filter and Compressor Wash Kits
Optioned with Required Equipment for CAT A Ops
7500# Incr. Gross Weight Capable, per local CAA regs
Cockpit Voice Recorder/Flight Data Recorder (IGW)
Articulated Landing Light (Cat A)
Forward Flashing Light (IGW)
200 Amp Starter Generators w/53 Amp Battery (Cat A)
Rotor Brake, Wire Strike, High Viz M/R Blade Markings
Aux Fuel Tank Equipment (39 US Gal)
Cockpit and Cabin (2) 12VDC power receptacles
AAI Door Openers and Floor Protectors
6-place aft ICS with Bose LEMO jacks
6 Bose A20 Headsets incl.
Year Interior: 2013
6-passenger stone leather corporate seating kit (18.5” seats) w/dark taupe piping, leather seat skirts, aft cabin closeout panel (leather wrapped), soundproofing, corporate headliner, and corporate interior trim w/grey dark taupe carpeting (dual pilot).
Year Painted: 2013
Matterhorn white base, with blue major accents, orange accent striping, and clearcoat. Exterior paint in good condition.
Undergoing 12 month/800 hour airframe inspection at Bell CSF, with completion in early October. Starter Generators overhauled recently, with new battery installed. 4 new shear bearings installed in main rotor head, and tail rotor pitch link assemblies upgraded to the lastest part number specification.
Tell the dealer you saw this ad on AircraftDealer.com